| |
RadioLabs - O2 Wireless Router & Repeater Kit 802.11B/G
The RadioLabs O2Link Router & Repeater Kit will fix the dead spots in, and maximize the range of your wireless network. External antennas can be added for greater area coverage, point-to-point, and point-to-multipoint systems.
|
|
| |
The O2 Router/Repeater supports WDS, also known as Wireless Distribution System or the Bridge/Repeater Mode, for point-to-point or point-to-multipoint communication and covers dead spots in Wireless LAN's. WDS allows O2Link Kit to wirelessly communicate with other RadioLabs Access points, or, with Blind Repeater mode, you can repeat any access point you see available.
RadioLabs O2Link Router/Repeater kit is a proprietary solution using FlexO2 capability. Each radio can act as an access point, client (To connect to any access point or router) WDS (For bridging), WDS+AP (For simultaneous bridge / access point capability) or as a blind repeater.
The Blind repeater mode is simple to setup and allows you to connect, change SSID and repeat your own custom SSID for your Access point. (Check legality in your location). No other radios on the market offer the same capabilities as RadioLabs O2Link and O2Point Routers.
|
|
802.11g Wireless Router & Repeater Kit
The RadioLabs High power (250mW) Router/Repeater Kit is the most effective way to extend the range of your wireless network. With no additional external antennas you will be able to effectively double the range of your wireless network. Whether filling in dead spots or setting up a home/office wireless system the RadioLabs o2Link High Power Router/ Repeater kit is the way to go. With the addition of directional antennas you can set up a wireless bridge for even more range. Our wireless bridge kits (line-of-sight and non-line-of-sight) allow for a point-point installation for a distance of up to 5 miles. These are the same radios used in our bridge kits, so you can purchase this kit to make your own using any antennas RadioLabs offers.
Each Wireless Router/Repeater kit includes one High Power O2Point Access point / Repeater and one O2Link Router / Repeater. The router connects directly to any broadband Cable or DSL modem through the WAN port. The two units are then put into dedicated WDS + AP mode for simultaneous Bridge and repeat.
Wireless Security:
The RadioLabs O2Link Repeater kit has a revolutionary WPA2 security mode. It will allow you to do a simultaneous Bridge, Repeat and WPA2, WPA, WEP or MAC address filtering. You can't get a higher secuirty level on your wireless system.
The RadioLabs High Power Router Repeater kit is able to put out over 300% more power than standard G/Super G routers with the stock antennas! The addition of an Omni Antenna is a great way to dramatically increase area coverage. These units come with an RP-SMA connector for an external antenna. If you need to increase the range of this wireless router, take a look at our WiFi antennas, Wireless Amplifiers , and Point-to-Point Bridge Kits.
For more information on the RadioLabs Bridge radios, click here for the O2Point Access Point Or, click here For complete specs on the O2Link Wireless Router.
Back
to WiFi Home
View all the WiFi Networking Devices |
|
 |
|
 |
|
|
|
|
|
| |
|
|
|
|
|
|
|
RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application. More... |
|
 |
|
| |
|
|
|
|
|
|
|
The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 14 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links. More... |
|
|
|
| |
|
|
|
|
|
|
|
ON SALE!! The RadioLabs WaveRV II is the perfect solution for those looking for a portable and flexible wireless device. It includes a high power card, USB cable for simple connection to a computer, and a 5.5dB rubberduck antenna. It easily attaches to the back of a notebook, but can also be used with additional cabling and high gain antennas for even more range. For an all-in-one solution, the WaveRV II fits the bill perfectly. More... |
|
|
|
|
| Model
# WK |
RadioLabs o2Link Repeaters |
| Wireless
LAN (802.11g, 802.11b, Super G) |
| Standards Compliance |
IEEE802.11b (Wireless
LAN Standard)
IEEE802.11g (Proposed Draft Standard) |
| Frequency Range |
2.412-2.462GHz (1-11 channel) 14 international |
| Transmission Rate |
802.11g 108* High-Speed Mode™: 13, 20, 27, 40, 54, 80, 110, 125 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps |
| Security |
WPA2, WPA-PSK(AES, TKIP), 128/64-bit WEP,Wireless Power Output Setting, MAC Address Registration |
| Access Mode |
Infrastructure Mode,
WDS (up to 6 units) |
| External Antenna Connector |
RP-SMA |
| Selectable Channels |
11 Channels (3 non-overlapping) 14 international |
| Communication Protocol |
Direct Sequence Spread Spectrum (DSSS),OFDM |
Wired
LAN and Others |
| Interface |
IEEE802.3 (10Base-T/100
Base-TX) |
| Transmission Rate |
10/100Mbps (autosense) |
| LAN Ports / Connector |
Four (4) 10/100 Base-T
RJ-45 ports (Auto MDI/X) -1 port AP |
| Transmission Encoding
Method |
10Base-T Manchester
coding:
100Base-TX 4B5B/MLT-3 |
| Access Method |
CSMA / CD |
| WAN Port / Connector |
One (1) RJ-45 port |
| Power Supply |
100-120V AC 50/60Hz
DC 7.5v, 1.23A |
| Dimensions |
W3xH6.75xD6.1 in.
(76x171x155mm) |
| Weight |
2 lb. (445g) Kit (shipping weight varies) |
| Operating Environment |
0-40° C, 20-80%
humidity (non-condensing) |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
