♠ RadioLabs || Outdoor Access Point

Outdoor 802.11 Access Point

Weatherproof Long Range Wireless Access Point | Bridge | Repeater
With over 15 times the power of an off-the-shelf wireless router, the RL3022EXT PLUS is one of the most powerful and configurable wireless access points available. It can be configured as a Long Range Access Point, Bridge or Wireless Repeater.

Features:

Extremely Long Operating Range
Easily Connect your Ethernet Devices or high speed connection with Wireless B/G mode
Make wireless AP and Bridge mode simultaneously with WDS (repeater)
Plug & Play (no driver required, but comes with CD rom manual)
Flexible Access Point locations and cost savings (Power-over-Ethernet injector included)
Includes mounting hardware and sealed cable assembly for complete weatherproof protection
Included 5dB rubberduck antenna

Weatherproof Outdoor High Power Wireless Access Point - NEW

Extreme Range - Now with 600mW Output!

With the demand for hardy, weatherproof 802.11 b/g wireless hardware on the rise, RadioLabs is proud to offer the RL3022EXTPlus Weatherproof High Power Access Point. With 600mw (+27.7dBm) of transmit power built into a sturdy weatherproof enclosure, this unit provides high speed long range wireless coverage where you need it most!

Powered via POE technology (Power-Over-Ethernet) the RL3022EXT Plus allows hardware placement flexibility without having to provide power directly to the unit. Just plug the included POE injector unit into your Cable/DSL modem or Network switch or hub, run a standard CAT-5 Ethernet cable to the RL3022EXT+ and your Weatherproof Outdoor Access Point has power and data through a single cable. No extension cords needed!

Get unmatched range with a huge 600mw (+27.7dBm) transmit power and -94 dBm receive sensitivity. This equals up to 15 times the range of an off-the-shelf wireless access point to provide unmatched coverage and connectivity.

The RL3022EXT PLUS is capable of multiple operation modes. It can be configured as a standard hard-wired wireless access point to provide a long-range wireless signal, it can also be setup in tandem with a secondary RL3022ext PLUS as a WDS-enabled bridge to wirelessly link two locations. In addition WDS-enabled bridging, you can also the WDS (wireless distribution system) to repeat the wireless signal for increased range.

No software is required. If using optional antennas or cabling, the Weatherproof High Power Access Point uses an RP-SMA external antenna connector. This is an exciting new product, and we are happy to offer such a quality item to our customers.

Get unmatched range with 600mW output - Up to 1 mile or more line of sight with an external antenna. Out of the box, you will have all you need to cover an entire office building, home or small neighborhood.

Weatherproof High Power Access Points have too high of output to be used with wireless amplifiers. Under no circumstances should any amplifier be used with these units.

Back to WiFi Home

View all the Wireless Network Devices



Professional Grade 15dB Omni WiFi Antenna

This high gain vertical 2.4 GHz antenna can act as the central point to your WiFi, WLAN or 802.11 application. The Radiolabs 2.4 Omni antenna has an incredible 15 dB of gain. This is a professional grade antenna that we typically sell to Wireless ISPs and installers, but it can certainly be used to boost up the wireless network in your home or office. More...

1 Watt Access Point

1 WATT OUTPUT! The BAP241W is the highest power access point/wireless router available. With a 1 Watt (+30dBm) power output, you will have all the coverage you need and then some! You cannot get a more powerful standalone wireless device without an FCC license! More...

High Power Access Point 600

COMING SOON!! Wireless Access Point \| Bridge \| Repeater - One of the best access points available. If you are looking for the best possible Wireless Access Point, the RadioLabs RL 3022 Deluxe AP is one of the most powerful and configurable wireless access points available. It can be configured as an AP, Bridge or Wireless Repeater. More...

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application. More...

WaveRV II and Backfire Kit

This High Power Wireless Kit includes the 200mw output WaveRv II USB Adapter, 10 foot of low-loss coaxial cable and our 15dB Backfire Directional Antenna. This is the complete kit for long range wireless links and is great for WISP client adapters More...

Vertical Omni-Directional 8 db WiFi Antenna

This high gain wireless LAN antenna is the perfect blend of performance and compact size. You can easily mount it provide a tremendous boost to the wireless range of your 802.11 router, hot spot, or access point. More...

Wave Magnum - High Power USB WiFi

Now with a whopping 1000mW output!! RadioLabs newest release, the Wave Magnum is the highest power output USB adapter ever released. The Wave Magnum is capable of 802.11B, G and Super G speed allowing up to 108mBps throughput and up to 1 Mile range. More...

Model # RL 3022PLUS

RadioLabs RL3022+ Access Point

Wireless LAN (for Router & Repeater)

Data Rates

1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps 108MBPs

Standards

IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

Compatibility

IEEE 802.11g/ IEEE 802.11b

Power Requirements

Power Supply: 90 to 240 VDC ± 10% (depends on different
countries) Device: 12 V/ 1A

Status LEDs

LAN: Link , WLAN: Link , Power: on/off

Regulation Certifications

FCC Part 15/UL, ETSI 300/328/CE

RF Information

Frequency Band

2.400~2.484 GHz

Media Access Protocol

Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)

Modulation Technology

Orthogonal Frequency Division
Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps

Operating Channels

11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France

Receive Sensitivity (Typical)

-94dBm @ 1Mbps -92dBm @ 6Mbps -83dBm @ 24Mbps
-92dBm @ 2Mbps -90dBm @ 9Mbps -79dBm @ 36Mbps
-89dBm @ 5.5Mbps -88dBm @ 12Mbps -74dBm @ 48Mbps
-86dBm @ 11Mbps -86dBm @ 18Mbps -72dBm @ 54Mbps

Available transmit power (Depend on Different Countries’ Regulation)

21 ± 2dBm @1, 2, 5.5 and 11Mbps
20 ± 2dBm @6, 9, 12, 18Mbps
17 ± 2dBm @24, 36Mbps
16 ± 2dBm @48, 54Mbps

RF Connector

SMA Type (Female Reverse)

Networking Information

Topology

Ad-Hoc, Infrastructure

Operation Mode

Point-to-Point/ Point-to-Multipoint Bridge/ AP/ WDS-Repeater

Interface

One 10/100Mbps RJ-45 LAN Port

Security

• IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS) Support—
AP Mode
• WPA -- Wi-Fi Protected Access
• PSK (Pre share key) with 64/ 128-bit WEP Key
• EAP-MD5/TLS/ TTLS authenticator (AP Mode) support
• TKIP
• MAC address filtering (WLAN)
• Hide SSID in beacons
• Layer 2 Isolation

IP Auto-configuration

DHCP client/ server

Management

Configuration

Web-based configuration (HTTP)

Firmware Upgrade

Upgrade firmware via Web-browser

Physical

Dimensions (HxWxD)

25(L)mm 108(W)mm 31(H)mm
4.9 (L)in 4.3(W)in 1.2(H)in

Weight

350 g (0.8 lb.)

Environmental

Interface

IEEE802.3 (10Base-T/100 Base-TX)

Transmission Rate

10/100Mbps (auto sense)

LAN Ports / Connector

One (1) 10/100 Base-T RJ-45 ports (Auto MDI/X)

Transmission Encoding Method

10Base-T Manchester coding:
100Base-TX 4B5B/MLT-3

Access Method

CSMA/CD

Power Supply

100-120V AC 50/60Hz DC 3.3v, 2.5A Power Over Ethernet

Weight

4 lbs 4 oz.

Operating Environment

Operating: -20ºC to 70ºC
Storage: -40ºC to 80ºC - Humidity 5%~95% Typical

Item # RL3022EXT
Price: $189.95

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

More Information

RadioLabs and RadioLabs.com are copyright. The contents of these webpages are © RadioLabs International Inc., 2003-2007. All rights reserved. If you experience any problems with our site, please contact our webmaster